As an Amazon Associate I earn from qualifying purchases.
DDM Tuning #ad - Lens holder: make of a high temp nylon / fiber glass composite to withstand up to 220 celsius 438 F. Lens: optically clear grade a glass. Projector size: width: 101mm, Length: 136mm. Comes with rubber gaskets to properly seal the projector in place. Wider hot spot for a more general beam that will put more light on the ground below the cutoff vs our V3 projector which is designed to give more distance.
Warranty: all dDM Projectors come with a lifetime warranty. Only the best lens is used for these projectors. Beam pattern: perfect light distribution will give plenty of light on the road in front of you.
6mm, gaskets, 2 x Mini Gatling Gun Shrouds. Reflector bowl: after casting the mold each reflector is polished smooth to remove any imperfections then coated with a high temp chrome coating that is again polished to a mirror finish to reflect more light forward. Our threaded collar is 15mm long to limit modification needed to stock headlights during installation. Mounting: h7 and h4 plates are included at no charge to allow for easier installation. With the larger solenoid we designed a deeper high beam that will illuminate further down the road.
DDM Tuning #ad - Warranty: as always our hiD kits come with a LIFETIME Warranty. Output: output up to 3400 Lumens when used on a 35W ballast. Output frequency is 250hz, reducing the chances for electronic feedback which can cause humming in improperly grounded audio systems.
These ballasts are virtually bulletproof and are designed to last 10-15 years. Ballast: the ballasts have been improved to require less current on startup to protect the factory wiring and to extend the life of the bulb by not forcing too much power to it at once.
Ballasts can also provide constant power to older bulbs which require more voltage to ignite. Alignment: manufactured in a state of the art facility using automated processes we guarantee perfect alignment of the xenon capsule for the best beam pattern possible. On top of this we've redesigned the capsule to produce up to 20% more light than the standard Apexcone HID bulbs which are already an industry leading bulb.
DDM Tuning #ad - Kit includes: 2 x ddm plus canbus 55w HID Ballasts, 2 x ULTRA Bulbs. Why ddm plus, aside from the higher output from our Ultra HID bulbs you also get a more efficient, faster starting ballast. Works on domestic trucks with tuner software.
DDM Tuning #ad - Works on domestic trucks with tuner software. Why ddm plus, aside from the higher output from our Ultra HID bulbs you also get a more efficient, faster starting ballast. Warranty: as always our hiD kits come with a LIFETIME Warranty.
DDM Tuning #ad - The ddm plus canbus ballast is part of the ddm plus line of hid kits. The ddm plus kits use our Ultra HID Bulbs and premium HID Ballasts. Works on domestic trucks with tuner software. Kit includes: 2 x ddm plus 35w canbus HID Ballasts 2 x ULTRA bulbs.
DDM Tuning #ad - Bulbs: our premium Ultra HID bulbs are quite simply the best. Ballast: the ballasts have been improved to require less current on startup to protect the factory wiring and to extend the life of the bulb by not forcing too much power to it at once.
Warranty: as always our hiD kits come with a LIFETIME Warranty. Output: output up to 3400 lumens.
DDM Tuning #ad - Why ddm plus, aside from the higher output from our Ultra HID bulbs you also get a more efficient, faster starting ballast. Simple plug and play installation. Warranty: as always our hiD kits come with a LIFETIME Warranty. No cutting or splicing required.
DDM Tuning #ad - Output: output up to 3400 Lumens when used on a 35W ballast. Bulbs: our premium ultra hid bulbs are quite simply the best. Ballasts can also provide constant power to older bulbs which require more voltage to ignite. Ballast: the ballasts have been improved to require less current on startup to protect the factory wiring and to extend the life of the bulb by not forcing too much power to it at once.
These ballasts are virtually bulletproof and are designed to last 10-15 years.
On top of this we've redesigned the capsule to produce up to 20% more light than the standard Apexcone HID bulbs which are already an industry leading bulb. Warranty: as always our hiD kits come with a LIFETIME Warranty. Alignment: manufactured in a state of the art facility using automated processes we guarantee perfect alignment of the xenon capsule for the best beam pattern possible.
DDM Tuning #ad - The ballasts also provide constant power to older bulbs which require more voltage to ignite. All d1 ballasts come with a universal 9006 style input and output connectors to attach to all OEM D1 bulbs, which ensures you a direct and secure fit.
1 year warranty. Sold Individually. These ballasts are virtually bulletproof and are designed to last 10-15 years. Do you need to replace one of your factory d1r or d1s ballasts but the thought of going to the dealer scares you? If so, check out our new Ultra D1 Ballasts! The ddm tuning ultra d1r/s hid ballasts have been improved to require less current on startup to protect the factory wiring and to extend the life of the bulb by not forcing too much power to it at once.
1. DDM Tuning
#adPair of DDM Tuning Bi Xenon Retrofit Mini H1 Projectors V2 Premium,2.5in, W / DDM Slim 55W HID Kit and Mini Gatling Gun Shrouds, DDM55W.5000K
#adWarranty: all dDM Projectors come with a lifetime warranty. Only the best lens is used for these projectors. Beam pattern: perfect light distribution will give plenty of light on the road in front of you.
More information #ad
The chrome coating can withstand the heat from both 35W and 55W HID systems without burning or yellowing over time. Kit includes: 2 x h1 v2 projectors, mounting hardware h7, h4 plates, 2 x hid bulbs, 2 x hid ballasts, height: 78.66mm, gaskets, 2 x Mini Gatling Gun Shrouds. Reflector bowl: after casting the mold each reflector is polished smooth to remove any imperfections then coated with a high temp chrome coating that is again polished to a mirror finish to reflect more light forward. Our threaded collar is 15mm long to limit modification needed to stock headlights during installation. Mounting: h7 and h4 plates are included at no charge to allow for easier installation. With the larger solenoid we designed a deeper high beam that will illuminate further down the road.
| Brand | DDM Tuning #ad |
| Manufacturer | DDM Tuning #ad |
| Part Number | Proj-H1-V2-PR.DDM55W.5000K |
More information #ad
2. DDM Tuning
#ad5500K, DDM Tuning Ultra 35W D2R / D2S Slim HID Kit D2S
#adThese ballasts are virtually bulletproof and are designed to last 10-15 years. Ballast: the ballasts have been improved to require less current on startup to protect the factory wiring and to extend the life of the bulb by not forcing too much power to it at once.
More information #ad
Bulbs: our premium ultra hid bulbs are quite simply the best. Kit includes: 2 x ultra d2s / d2r slim 35w hid ballasts 2 x Ultra D2S / D2R HID Bulbs. Ballasts can also provide constant power to older bulbs which require more voltage to ignite. Alignment: manufactured in a state of the art facility using automated processes we guarantee perfect alignment of the xenon capsule for the best beam pattern possible. On top of this we've redesigned the capsule to produce up to 20% more light than the standard Apexcone HID bulbs which are already an industry leading bulb.
| Brand | DDM Tuning #ad |
| Manufacturer | DDM Tuning #ad |
| Part Number | UltraSlim35W.D2.Kit |
| Warranty | Limited Lifetime Warranty, excludes physical damage, water damage |
More information #ad
3. DDM Tuning
#adDDM Tuning Plus 55W Premium Canbus HID Kit, 9012 5500K
#adMore information #ad
No cutting or splicing required. Simple plug and play installation. The ddm plus kits use our Ultra HID Bulbs and premium HID Ballasts. The ddm plus canbus ballast is part of the ddm plus line of hid kits. Warranty: as always our hiD kits come with a LIFETIME Warranty. Guaranteed error free on "Picky" Vehicles among many others.| Brand | DDM Tuning #ad |
| Manufacturer | DDM Tuning #ad |
| Part Number | DDMPlusCanbus55W.9012.5500K |
More information #ad
4. DDM Tuning
#adSlim AC Ballasts w / Hi-Output Bulbs H13 / 9008, 5500K, DDM Tuning Plus 55W Premium Canbus HID Kit, Low Beam
#adMore information #ad
Simple plug and play installation. The ddm plus kits use our Ultra HID Bulbs and premium HID Ballasts. Kit includes: 2 x ddm plus canbus 55w HID Ballasts, 2 x ULTRA Bulbs. Guaranteed error free on "Picky" Vehicles among many others. No cutting or splicing required. The ddm plus canbus ballast is part of the ddm plus line of hid kits.| Brand | DDM Tuning #ad |
| Manufacturer | DDM Tuning #ad |
| Part Number | DDMPlusCanbusKit55W.H13.5500K |
More information #ad
5. DDM Tuning
#adDDM Tuning Plus 35W Premium Canbus HID Kit, 9012 5500K
#adMore information #ad
No cutting or splicing required. Warranty: as always our hiD kits come with a LIFETIME Warranty. Guaranteed error free on "Picky" Vehicles among many others. Simple plug and play installation. Why ddm plus, aside from the higher output from our Ultra HID bulbs you also get a more efficient, faster starting ballast.| Brand | DDM Tuning #ad |
| Manufacturer | DDM Tuning #ad |
| Part Number | DDMPlusCanbus35W.9012.5500K |
More information #ad
6. DDM Tuning
#adDDM Tuning HID Xenon AC Slim Replacement Ballast 35W for All Bulbs
#adDDM Tuning #ad - Upgrade either your oem 35 watt ballasts OR existing aftermarket HID ballasts with our 35 W ballasts. Great for brightening your 35 W HID system. Easily exchanges with quick attachment plug-and-play style connectors. 35 watt digital slim ballasts available. 1 year warranty.More information #ad
| Brand | DDM Tuning #ad |
| Manufacturer | DDM Tuning #ad |
| Part Number | DDMSlimBallast-35W |
More information #ad
7. DDM Tuning
#adDDM Tuning Ultra D1S D1R HID Kit D1S, 5500K
#adWarranty: as always our hiD kits come with a LIFETIME Warranty. Output: output up to 3400 lumens.
More information #ad
Kit includes: 2 x ultra hid ballasts 2 x Ultra D1 HID Bulbs 2 x Ballast to Bulb Adaptors 2 x Input connectors. Alignment: manufactured in a state of the art facility using automated processes we guarantee perfect alignment of the xenon capsule for the best beam pattern possible.| Brand | DDM Tuning #ad |
| Manufacturer | DDM Tuning #ad |
| Part Number | UltraKit35W.D1S.5500K |
| Warranty | Limited Lifetime Warranty, excludes physical damage, water damage |
More information #ad
8. DDM Tuning
#adSlim AC Ballasts w / Hi-Output Bulbs H11, DDM Tuning Plus 35W Premium Canbus HID Kit, 6500K
#adMore information #ad
The ddm plus kits use our Ultra HID Bulbs and premium HID Ballasts. Works on domestic trucks with tuner software. Kit includes: 2 x ddm plus 35w canbus HID Ballasts 2 x ULTRA bulbs. Guaranteed error free on "Picky" Vehicles among many others. The ddm plus canbus ballast is part of the ddm plus line of hid kits.| Brand | DDM Tuning #ad |
| Manufacturer | DDM Tuning #ad |
| Height | 8.04 Inches |
| Length | 9.72 Inches |
| Weight | 2.53 Pounds |
| Width | 2.52 Inches |
| Part Number | DDMPlusCanbusKit35W.H11.6500K |
More information #ad
9. DDM Tuning
#adDDM Tuning Ultra 35W D4R / D4S Slim HID Kit D4R, 6500K
#adThese ballasts are virtually bulletproof and are designed to last 10-15 years.
More information #ad
Output frequency is 250hz, reducing the chances for electronic feedback which can cause humming in improperly grounded audio systems. Kit includes: 2 x ultra d4r / d4s 35w hid ballasts 2 x Ultra D4R / D4S HID Bulbs. On top of this we've redesigned the capsule to produce up to 20% more light than the standard Apexcone HID bulbs which are already an industry leading bulb. Warranty: as always our hiD kits come with a LIFETIME Warranty. Alignment: manufactured in a state of the art facility using automated processes we guarantee perfect alignment of the xenon capsule for the best beam pattern possible.
| Brand | DDM Tuning #ad |
| Manufacturer | DDM Tuning #ad |
| Part Number | UltraSlim35W.D4.Kit |
| Warranty | Limited Lifetime Warranty, excludes physical damage, water damage |
More information #ad
10. DDM Tuning
#adDDM Tuning HID Xenon AC Ultra 35W D1S D1R Replacement Ballast
#ad1 year warranty. Sold Individually. These ballasts are virtually bulletproof and are designed to last 10-15 years. Do you need to replace one of your factory d1r or d1s ballasts but the thought of going to the dealer scares you? If so, check out our new Ultra D1 Ballasts! The ddm tuning ultra d1r/s hid ballasts have been improved to require less current on startup to protect the factory wiring and to extend the life of the bulb by not forcing too much power to it at once.
More information #ad
| Brand | DDM Tuning #ad |
| Manufacturer | DDM Tuning #ad |
| Height | 1.8 Inches |
| Length | 5.52 Inches |
| Weight | 0.57 Pounds |
| Width | 3.48 Inches |
| Part Number | Ultra 35W D1S/R HID Ballast |
More information #ad
